MoreGreen Tire Wire Drawing Machine
The tire wire drawing machine can pull out the steel wire in the waste tyre all at one-time, and prepare for the subsequent shredding tires and tyre pyrolysis. Pulling the steel wire out of the tire avoids damage to the blade of the tire shredder and results in higher oil yield and higher quality pyrolysis oil during tyre pyrolysis. The steel wire that is completely pulled out has a higher quality than the steel wire that has been subjected to high temperature.
The tire drawing machine is generally divided into two types: the double hook wire drawing machine and the single hook wire drawing machine.
Globally, hundreds of millions of used tires are produced every year, and the number is increasing every year. Waste tyres have high economic value. Common waste tire treatment methods include milling, pyrolysis, and fuel. Regardless of the type of treatment, the wire inside the tyre needs to be pulled out for further processing.
MoreGreen Waste Tire Wire Drawing Machine Processing Tires
When the tire needs to be shredded, pull the wire out to avoid damage to the blade of the shredder. After the tire is pulled out of the steel wire and enters the pyrolysis furnace for pyrolysis, a higher oil yield and a better quality pyrolysis oil can be obtained because there is no steel wire interference.
The steel wire pulled out at one time will be of even better quality because it has not been subjected to high temperature treatment.
There are two types of MoreGreen tire wire drawing machines: single hook tire wire drawing machines and double hook wire drawing machines. They can pull the steel wire out of the waste tyre, but in a slightly different way.
Single Hook Tire Wire Drawing Machine
Double Hook Tire Wire Drawing Machine
Single hook tire wire drawing machine：Powered by a hydraulic system. The tire is raised by the tire lifting device, and then the hook is extended from the cross hole, the steel wires on both sides of the tyre are hooked together, and the steel wire is pulled back. At this time, the wire pressing structure will fix the steel wires on the hook, and then the hook will continue to move backwards, and finally, the steel wires will be completely pulled out of the tire. The single hook tire wire drawing machine uses a hydraulic system to power itself.
Double hook tyre wire drawing machine：Powered by a mechanical transmission power system. The tire is placed in the middle of the double hook tyre drawing machine, and the motor drives the two disk hooks to rotate. The two hooks will each grab the steel wires on both sides of the tire and then continue to rotate inward, eventually pulling the steel wires on both sides out of the tire.
|1||Hourly Capacity||40-60 pieces||60-120 pieces|
|2||Tire Size||≤φ1200 mm||≤φ1200 mm|
|4||Pull Power||15 mt||30 mt|
|5||Cylinder Moving Distance||1300 mm||/|
|6||Weight||1.4 mt||6.5 mt|
|7||Overall Dimensions||3150*750*1400 mm||2300*2000*1530 mm|
There are two common models in the above table. You can choose according to the number of waste tires you need to handle.
MoreGreen tire wire drawing machines have the following advantages:
- The main components of the two types of tire wire drawing machines, such as hooks and cross holes, are special materials, high strength and wear resistance.
- The hydraulic system of the single hook tyre wire drawing machine uses the international advanced constant power variable displacement piston pump technology, which has low working noise and high pressure, which improves the safety factor and service life of the equipment.
- Double hook tire wire drawing machine adopts integral bottom plate, which is easy to install, stable and reliable
- Double hook tire wire drawing machine adopts disc type hook, which has small footprint and high production efficiency.
Ordinary packaging is a wooden box. If the machine is relatively large, we will use a tool such as steel wire to fix the equipment to ensure that the equipment will not be damaged during transportation.
We provide the door to
We provide a one-year warranty for the entire equipment (free maintenance, except for consumables under normal operating conditions), lifetime maintenance;
We provide the latest waste energy industry information and research reports for your reference to help you make the right decisions.
After receiving the deposit, we immediately began to arrange production. Typically, the single hook tire wire drawing machine has a production cycle of 25 days and the double hook tire wire drawing machine has a production cycle of 30 days.
Of course, we are always welcome to visit the factory！And our company hopes that after the initial exchanges between the two sides, professional and technical personnel will accompany you to visit the production plant purposefully. We believe that this will make the understanding of both sides deeper and more efficient！
Yes! We can provide turnkey on-site installation and commissioning; and provide personnel training for all countries and regions.
If you have any other questions, please feel free to contact us and we will answer your questions professionally and efficiently.